This product is intended for connecting it with the RC Logger HD, RC Logger HD2, RC Logger PRO or RC Logger LC (not included) to provide system data such as power usage including voltage-, current- consumption and motor RPM during flight. This will allow users to determine the total current drawn from the ESC/BEC as well as the voltage provided from the main battery. The module will also allow to check individual LiPo cell voltage, whereby 6S are supported. The collected data can be viewed and analyzed with the RC Logger Viewer PC Software. Exported data may also be analyzed by Microsoft Excel or similar applications. All collected add-on module data are synchronized with the video- or photo- material captured by the RC Logger (HD version only). The included buzzer will alert the user if any of the cells appear to be faulty or low capacity. The buzzer may be connected optionally if required but is included with the product shipping content.
The following items are included in the delivery:
- Power & RPM module
- Logger Connection Cable to connect to RC Logger HD, RC Logger HD2 / RC Logger LC
- Module Connection Cable to connect to other sensors
- RPM Adapter Cable
- Buzzer with cable
- 2 red heat shrinks
- 4 black heat shrinks
- Male power connector
- Female power connector
- Operating instructions
- Power & RPM module
- Status LED
- Power LED
- I/O and Power port (1x V-in / 1x V-out / 2x GND)
- Motor RPM port/connector
- Lipo cell port/connector (6S)
- Warning buzzer
| Technical Specifications | |
| Operating voltage: | 3.6 to 6 V/DC |
| Maximum current consumption: | 130 mA |
| Operation temperature: | -10 to +60 Celsius |
| Storage temperature: | -20 to +60 Celsius |
| Current Specifications | |
| Current range: | up to 200 A |
| Current resolution: | 0.1 A |
| Main Voltage Specifications | |
| Cells supported: | up to 12S |
| Voltage range: | 0 - 50.4 V |
| Voltage resolution: | 0.1 V |
| Individual Cell Voltage Specifications | |
| Cells supported: | up to 6S |
| Voltage range: | 0 - 4.2 V |
| Voltage resolution: | 0.1 V |
| RPM Specifications | |
| RPM display range: | 0 - 19000 rpm |
| RPM measurement range: | 150 - 19000 rpm |
| RPM resolution: | 10 rpm |
| Physical Specifications | |
| V-in/V-out cable length: | 100 mm |
| Balancer cable length: | 120 mm |
| Buzzer cable length: | 100 mm |
| RPM cable length: | 100 mm |
| Logger connection cable length: | 200 mm |
| Module cable length: | 200 mm |
| Dimensions (W x H x D): | 33 x 23 x 43 mm |
| Weight: | 70 g |
- Datasheet
- Operating instructions
- Important: Hint-sheet